How to Whiten Nat

How to Whiten Nat At this info this is the How to Whiten Nat, has been shared on this blog completely from start to finish. Hopefully this info will be useful to you and can be practiced.

Title : How to Whiten Nat
Link : How to Whiten Nat

Tiles can be cleaned and glazed easily, but it is different from the grout. Sometimes, you have to repaint all nat. You don't need special equipment to clean the grout. Instead, maybe you already have it at home. If you choose to repaint grout, you should buy a special type of paint.

Step

Clean Nat Dirty

1. Start with warm water and a nylon brush. Sometimes, a little water and a brush is enough to clean the grout. Simply pour warm water on the grout, then rub it using a stiff bristle brush in a circle. This Step : is enough to get rid of the light dirt, and return the white grout.
   
   • For heavier stains, add a few drops of dishwashing soap to warm water.
   • Try to use a special brush to clean the grout. If not, use an old toothbrush or manicure brush. However, do not use a wire brush because it can damage the grout.
2. Use vinegar solution for mold stains. Fill the spray bottle with vinegar and warm water in a balanced ratio (1: 1). Spray the mixture in the stained area, wait 5 minutes, then rub using a stiff bristle brush. If needed, rinse the area with warm water.
   
   • Do not use this method if the tile is made of marble or natural stone because it can be damaged by vinegar.
3. Use a baking soda mixture and water for heavier stains. Mix water with baking soda to produce thick paste. Spread this paste into a dirty area, rub with a stiff bristle brush, then rinse with warm water. ^[1]
   
   • You can also spray a solution of water and white vinegar in a balanced manner on baking soda paste. When you stop hissing and foam, rub the area with a stiff bristle brush.
4. Use hydrogen peroxide on strong stains. You can spray hydrogen peroxide directly into the stained area, or make pasta using baking soda. ^[2] After that, wait a few minutes, then rub using a stiff bristle brush. Rinse with water when it's finished. ^[3]
   
   • Hydrogen peroxide effectively cleanses blood stains.
5. Use cleaners "oxygen bleach"commercial. Look for products that claim to be able to clean the grout, or say"oxygen bleach"(Oxygen bleach). Turn on the bathroom fan or open the window, and wear gloves. Use the product according to the guidelines on the packaging. Most products will need to be left on for 10-15 minutes, then rubbed using a stiff bristle brush. When done, rinse the cleanser with warm water.
   
   • These famous cleaning brands include: Biokleen Oxygen Bleach Plus, Clorox, OxiClean, and OxiMagic.
6. Put the grout until it returns to its original color. Start by arranging tools steam pressure to the lowest setting, and gradually increase to high settings if needed. Use the brush head for stubborn stains.
   
   • Steam cleaning does not use cleaning at all. Instead, it uses steam and pressure to blow dirt and oil.
7. Use bleach that is diluted with water for extreme cases. Turn on the bathroom fan or open the window. Wear rubber gloves, safety glasses and used clothing. Next, fill the spray bottle with 1/11 bleach and 10/11 water. Spray the dirty grout and wait for 2 minutes. Rub the area with a stiff bristle brush, then rinse with water.
   
   • Use bleach carefully if the bathtub is made of porcelain. Bleach can cause porcelain to turn yellow or hollow. ^[4]
8. Try baking soda and whitening paste for extreme cases. Mix 2/3 baking soda with 1/3 bleach to make thick paste. ^[5] Spread the paste on dirty grout and wait for 5-10 minutes. When it's time, rinse the pasta with water. ^[6]
   
   • Although mixing bleach with other chemicals is usually dangerous, a mixture of bleach and baking soda is considered quite safe. Many people actually state that the efficacy of cleansers is both increasing.

Paint White Nat

1. Buy white grout paint. You can find paint grout in hardware stores or home appliances. This paint might also be labeled "grout colorant"(nat coloring). This paint is usually epoxy and very durable. Nat paint is not the same as nat stains, which are usually clear and not white.
   
   • Depending on the color of the grout, white grout paint can appear slightly darkened when hardened.
   • If the tile is very dark, the white grout may appear too bright. Try to choose bright gray or pale white.
2. Prepare tiles and grout. Patch the area that is gouged with grout, and let it harden. If you need to seal the tiles, do it now, but try sealer (sealing) is not about nat. Sealer will make paint grout difficult to stick. You should also ensure that the grout is clean, and free of oil, food, soap or dirt.
   
   • If you wash the tiles, make sure to dry completely before continuing.
3. Prepare a small paint brush and paint tray. The brush must be small enough to enter the grout line. You can even use an old toothbrush. Cheap paint brushes sold in hardware stores are ideal for this Step :. You also need a paint tray, or another small container to hold paint.
   
   • If you are worried about brush hair falling out and sticking to the grout, use a foam brush instead. Make sure the width is equal to the width of the nat line.^[7]
   • Consider trimming the brush slightly so that it is more rigid. That way, you can control your brush better.
   • Another option is to use a small paint applicator wheel. This tool allows you to paint easily and accurately.
4. Pour the paint onto the paint tray. Pour less than expected; You can add it later. If it's too much, the paint will dry on the tray before you can use it all.
   
5. Wipe the paint with long, back and forth movements. ^[8] Dip the brush tip onto the paint tray to take a little paint. Rub it slowly along the grout. Do it carefully so that the tile is not exposed to paint. If it's already done, the paint can be cleaned; but even better if you don't need to clean anything.
   
   • The grout will only stick to the grout and can be cleaned from the tiles. If you're worried, cover the tile with masking tape (masking tape)^[9]
6. Wipe the excess paint from the tile with a damp cloth. If the paint dries on the tile, scrape it with your nails. ^[10] You can also use a putty knife or a used spoon.
   
7. Wait for the paint to dry before applying the second layer. Depending on the paint brand, you need to wait for 1 hour or more. Read labels on the paint packaging to ensure dry paint time. The paint must be completely dry before the second layer can be rubbed.^[11]
   
8. Let the paint harden if needed, before the area can be reused. Depending on the brand used, you need to let the paint harden before returning to the tiled area. Some paint only needs to dry out.
   
   • We recommend that you leave the paint dry more than the recommended time to make sure it is completely dry.
9. Consider sealing grout with grout sealer (sealing nat). This product helps paint last and clean longer, and is easier to clean later on.
   

Tips

• Keep the bathroom grout clean by spraying it 2-3 times a week with a mixture of white vinegar and water with a ratio of 1: 1. Vinegar will kill all the mushrooms. ^[12]
• Spray the rubbing alcohol on the shower once a week to kill the fungus. ^[13]
• New nat seal with grout sealer 10-14 days after nat. ^[14] This seal will protect the grout from stains and is easier to clean.
• Nat usually looks darker when wet. If the grout is not as white as desired, try to wait until it is dry before determining whether the grout needs to be cleaned and scrubbed again. ^[15]

Warning

• Do not mix bleach with other home cleaning products. Chemical reactions that arise can produce harmful gases.
• When dealing with bleach and other home cleaners, make sure the air chamber is good. You should also wear gloves, shoulder long sleeves, trousers and safety glasses. There will be lots of splashes when you rub the grout.
• Don't use a wire brush. Brush this too hard on the grout and can scratch it and the surrounding tiles. It's best to choose a nylon brush.
• Don't use vinegar on natural marble and stone tiles because it can be damaged. ^[16]

Things You Need

Clean Nat Dirty

• Cleaners according to choice
• Towel
• Scouring pads
• Stiff hairy nylon brush
• Glasses and protective gloves
• Knee protector

Paint White Nat

• Dyes or paint grout
• Small and stiff paint brush
• Paint trays or small containers
• Wet wipe or abrasive sponge

Source

$ 2

Source link & Translate By :

Similarly, info How to Whiten Nat, hopefully this info can be useful for you all, and good luck.

Subscribe to receive free email updates: